location:Home > News > Roller bearing seat in the clean-up of how to operate
                    Roller as the heart of belt conveyor. Roller bearing seat of the need to improve the quality of the components of the strict quality control to ensure that the structure and components of the seal, so that the roller bearing seat has a good sealing function. The utility model can prolong the service life of the supporting roller through extending the gap and the length of the labyrinth. The roller bearings are widely used in outdoor large dust, high corrosive environment, such as mines, power plants, steel mills, stone factory, cement factory and coking plant, coal washery, salt, soda plant, fertilizer plant, pier all delivery place.
                    The roller bearing seat comprises a seat body and the seat body of the bearing device, the inner and outer labyrinth sealing ring, sealing ring in the outer end of the main seat body with a waterproof and dustproof shield ring. The inner and outer sealing rings are provided with labyrinth spaces. Because of the original layout of the protective cover and dust cover, not only simple layout, parts cut, and seat depth reduction, saving information, so that the cost of production greatly reduced. The utility model has the advantages of improving the sealing effect and extending the service life of the supporting roller. Roller bearing seat of the need to improve the quality of the components of the strict quality control to ensure that the components of the layout and sealing, so that the roller bearing seat has a good sealing function.
                    Roller bearing seat in the clean-up of how to operate? Here to introduce you.
                    In the removal of roller bearings under repair, the first record of the bearing appearance, to recognize the remaining amount of lubricant, after sampling the lubricant used to check the bearings. As a cleaning agent, general use gasoline, kerosene.
                    Remove the bearings of the cleaning, sub clean and fine cleaning, respectively, in the container, put the metal mesh on the bottom of the first, so that the bearings do not directly touch the container dirt. Fine cleaning, if the bearings with dirt rotation, will damage the bearing rolling surface, probably to pay attention to.
                    In the rough cleaning oil, use the brush to remove grease, adhesive material, roughly clean, into the fine wash. Fine cleaning, is the roller bearings in the cleaning oil while rotating, while carefully cleaning. In addition, clean oil should always be kept clean.
                    Some friends in the use of roller bearing seat will be encountered in the case, then to introduce you to the roller bearing seat correction method.
                    1, the appearance of the treatment, the bearing seat will be required to remove the appearance of oil, in addition to moisture;
                    2, harmonic correction data;
                    3, modify the data, the data will be uniformly altered in the bearing seat correction parts, filled with strong;
                    4, waiting for data curing, heating material can be appropriate to accelerate the appearance of data.
                    SHARE:
                    SHANDONG XINKAITE BEARING CO., LTD.

                    TEL:+86 (531) 87901699 Fax:+86 531 87901699 (Office)

                    TEL:+86 (635) 5638235 Fax:+86 635 5638808 (Factory)

                    EMAIL: info@xinkaite.com

                    ADDRESS: Xucun Industrial Garden Guanxian County Liaocheng, SD 252519

                    ALL RIGHTS RESERVED ? SHANDONG XINKAITE BEARING CO., LTD.
                    亚洲自拍偷拍